钢筋除锈剂 Rust remover for steel bar

钢筋除锈剂介绍：

Introduction of steel bar rust remover:

除锈剂可广泛应用于制造业、建筑业、修理业、交通、能源、电力、石油及矿山开采等多种行业，适用于机械设备、车辆、船舶、军械、五金工具、建筑模板、金属零配件等钢材的除锈。传统的除锈方式会大量产生的残渣，需经常排放，既严重腐蚀工业管道，又污染土壤和环境。

Rust remover can be widely used in manufacturing, construction, repair industry, transportation, energy, electric power, petroleum and mining and other industries, suitable for machinery and equipment, vehicles, ships, weapons, hardware tools, building template, metal parts and other steel rust removal. The traditional rust removal method will produce a large amount of residue, which needs to be discharged frequently, which not only seriously corrodes the industrial pipeline, but also pollutes the soil and the environment.

钢筋除锈剂特点：

Characteristics of steel bar rust remover:

1、除锈效果迅速，可迅速除去金属表面的锈斑。

2、能渗透溶解碳酸盐等沉积物（如水垢）,并将其它的不溶性物质在反应过程中分解脱落。

3、没有类似浓盐酸的发烟现象和使用上的危险。

1. the effect of rust removal is rapid, can quickly remove the metal surface rust spots.

2. It can permeate and dissolve carbonate and other sediments (such as scale), and decompose and fall off other insoluble substances in the reaction process.

3. there is no smoke phenomenon similar to concentrated hydrochloric acid and the risk of use.

钢筋除锈剂用途：

Use of steel bar rust remover:

可迅速清除黑色金属表面，铜、铁、大理石、船舶、电镀件、自行车链条，农具零件，机械设备及零部件，金属制品及零部件等上的锈斑。

It can quickly remove rust spots on black metal surface, copper, iron, marble, ships, electroplated parts, bicycle chains, farm tools parts, machinery and equipment, metal products and parts, etc.

什么是除锈剂呢?除锈剂，顾名思义，可以清除金属表面的锈迹，适用于机械设备、车辆、船舶、军械、五金工具等金属。那么你知道除锈剂的使用方法吗?金属材料和制品经过长时间的氧化容易生锈，生锈到一定程度就会腐烂，降低了金属的使用寿命。对于使用除锈剂时应注意些什么呢?

What is a rust remover? Rust remover, as the name suggests, can remove the rust on the metal surface, suitable for machinery and equipment, vehicles, ships, weapons, hardware tools and other metals. Then do you know how to use the rust remover? Metal materials and products after a long time of oxidation is easy to rust, rust to a certain extent will rot, reducing the service life of the metal. What should be paid attention to when using rust remover?

钢筋除锈剂的使用方法：

Use method of steel bar rust remover:

根据被除锈的材质不同，除锈时的要求不同，除锈剂的使用方法也不同，需要按照正确的使用要求，才能达到好的除锈效果。

According to the different materials to be derusting, the requirements of derusting are different, the use of rust remover is also different, need to be in accordance with the correct use requirements, in order to achieve good derusting effect.

手动除锈法：

Manual rust removal method:

1、将水和除锈剂按照2比1的比例进行调和，将除锈剂进行稀释;

2、用稀释后的除锈剂对生有锈迹的表面进行清洗擦拭;

3、在除锈剂涂抹完20分钟时间里，需要保证生锈的表面尽量的湿润，如果效果不好，可以用除锈剂进行反复的擦拭。

4、在擦拭完毕后，用清水冲洗表面，使用热水效果更好，这样可以让表面更快的干燥，同时还可以预防生锈。

1. water and rust remover according to the ratio of 2 to 1 to reconcile, the rust remover for dilution;

2. Clean and wipe the surface with the diluted rust remover;

3. In the 20 minutes after the rust remover is smeared, it is necessary to ensure that the rusty surface is as wet as possible. If the effect is not good, you can wipe it repeatedly with the rust remover.

4. After wiping, rinse the surface with water and use hot water for better effect, which can make the surface dry faster and prevent rust at the same time.

浸泡槽除锈法：

Soaking tank rust removal method:

1、在浸泡槽里水和除锈剂按照5比1的比例进行调和;

2、除锈的温度保持常温即可，如果有条件可以将除锈剂进行加温，加温至上限70摄氏度即可;

3、锈蚀的物体放在浸泡槽内浸泡的时间不能超过三个小时;

4、浸泡完毕后，用清水冲洗表面，使用热水效果更好，这样可以让表面更快的干燥，同时还可以预防生锈。

1. in the soak tank water and rust remover in accordance with the ratio of 5 to 1 to reconcile;

2. The temperature of rust removal can be kept at normal temperature. If conditions permit, rust remover can be heated up to the upper limit of 70 degrees Celsius.

3. The time for the corroded object to soak in the soaking tank can not exceed three hours;

4. After soaking, wash the surface with clean water and use hot water for better effect, which can make the surface dry faster and prevent rust.